BecomingbulletproofmovieCall (509) 440-9874

Custom Cabinets in Yakima, WA

Custom Cabinets Built for Yakima Valley Homes

Custom kitchen cabinetry, vanities, and built-ins measured, built, and installed to fit your room exactly. Free in-home estimates across the Yakima Valley.

Call (509) 440-9874Book an In-Home Visit
Custom cabinets in Yakima, WA

Around the Valley

Local project spotlights and homeowner stories from neighborhoods across Yakima.

Planning Custom Cabinets for an Older Yakima Home

July 1, 2026

Custom cabinets planned for an older Yakima kitchen

Yakima has a lot of homes built well before the current era of standardized cabinet sizes, from the older bungalows near Barge-Chestnut to the mid-century houses up in West Valley. Updating the cabinets in one of them is one of the best ways to modernize a kitchen without gutting the whole house. It just takes a little more planning than a new build. Here is what we tell homeowners before we start.

Expect Walls That Are Not Square

Older homes settle over decades, so walls lean a bit, corners drift off ninety degrees, and floors slope toward the door. Stock cabinets fight those conditions and leave visible gaps. Custom boxes, scribed and shimmed to the real wall, close them up. The single most useful thing you can do is book a careful field measure before you commit to a layout, because that measurement is what turns guesswork into a tight fit.

Match the Materials to How You Cook

The prettiest kitchen fails if the finish cannot take daily use. Painted maple and conversion-varnish finishes wipe clean and resist the steam near a range. Cabinet-grade plywood boxes shrug off the occasional leak under the sink far better than particleboard. If you want the warmth of natural wood, species like cherry and hickory age beautifully. Our page on custom kitchen cabinets walks through the wood and door options in more detail.

Plan the Layout Around Your Real Habits

Before you fall for a look, map how you actually move in the kitchen. Where do the groceries land, where does the trash live, which corner wastes space today. Custom construction lets us put a pull-out where a dead corner used to be and size a pantry to your ceiling on Summitview Avenue. A layout built around your habits beats a magazine layout that ignores them.

Do Not Forget the Details

The small stuff separates a good kitchen from a great one. Soft-close hinges and undermount drawer slides, a toe kick that matches the floor, light rail under the wall cabinets, and hardware that suits your hand all add up. These are decisions worth making on purpose rather than defaulting to whatever comes standard.

Get a Real Measure First

The best first move for any older home is a free in-home measure. It surfaces the surprises, the settled floor, the old plaster wall, the odd window height, before they turn into change orders. From there we draw the kitchen, you approve it, and we build to fit.

Thinking about new cabinets for your older Yakima home? Contact us or call Becomingbulletproofmovie at (509) 440-9874 for a free in-home estimate.

Read the full article

Becomingbulletproofmovie provides custom cabinets in Yakima, WA, from custom kitchen cabinetry and bathroom vanities to built-in cabinetry, closet systems, cabinet refacing, and cabinet refinishing. Every box is built to fit the room it goes in, never pulled off a shelf in a standard size. We measure, design, build, and install for homeowners from West Valley to Terrace Heights, and out to the 98908 ZIP off Fair Avenue.

Because we cover the whole valley, our install route already runs past most Yakima streets in a given week. We build kitchens in Nob Hill, vanities in Fruitvale, and mudroom lockers for families in Southeast Yakima, and we reach the nearby towns of Selah, Union Gap, and Moxee on the same schedule. A crew that already crosses Summitview Avenue every few days can template your kitchen without tacking a trip charge onto the estimate.

Homeowners along Tieton Drive keep calling us back because the fit stays tight and the finish holds up for years. One family off Nob Hill Boulevard swapped their dated oak boxes for painted maple and said the kitchen finally matched the rest of their remodel. Word travels fast in a valley this size, and a lot of our work in the 98902 area now starts with a neighbor pointing us down the block.

The process is simple. We come out for a free in-home measure, help you weigh door styles, wood species, and finishes against how you actually cook, then hand you a written estimate before any sawdust flies. We fabricate in the shop and install clean, protecting your floors and hauling the old cabinets away. Most kitchens near Washington Avenue are back in daily use within a day of the install.

  1. Built to your roomEvery cabinet is sized to your actual walls, not a stock module, so the fit stays tight even in older Yakima homes.
  2. One local crewThe same people who measure on Fair Avenue build and hang your cabinets, from the first cut to the final door.
  3. Written estimatesYou get a clear, itemized price before we start, and that number is the one you pay at the end.
  4. Clean installsWe protect floors and counters, keep the dust down, and haul the old boxes away when the job wraps.

Local Pricing You Can Plan Around

Cabinet cost comes down mostly to the scope and the materials you choose. Refacing and refinishing keep your existing boxes and cost the least, semi-custom and fully custom cabinetry are priced by the linear foot, and standalone vanities and built-ins are priced per unit. The ranges below are typical for the Yakima area, and we put the firm number in writing after a free in-home measure.

Refacing or refinishing$1,800 to $10,000 per kitchen
  • Keeps solid boxes
  • Fastest turnaround
Get estimate
Fully custom cabinets$500 to $1,200 per linear foot
  • Built to exact sizes
  • Any wood or finish
Get estimate
Vanity or built-in$500 to $2,800 per unit
  • Sized to the space
  • Matched to your kitchen
Get estimate

Cabinet Services We Bring to Your Door

One local shop for the whole project, from a full custom kitchen to a single vanity or a wall of built-ins.

Custom Kitchen Cabinetry

Made-to-order base, wall, and pantry cabinets built to your exact kitchen, including odd corners and non-standard sizes that stock lines cannot fit.

Bathroom Vanities and Storage

Vanities, medicine cabinets, and linen towers built around your plumbing and finished in moisture-resistant materials for a Yakima bathroom.

Cabinet Refacing and Redooring

New doors, drawer fronts, and veneer over solid existing boxes, a lower-cost path when the carcasses are still sound.

Built-In Cabinetry and Millwork

Entertainment centers, bookcases, window seats, and mudroom lockers scribed and fitted to your walls for a seamless look.

Closet Systems and Custom Storage

Walk-in and reach-in organizers, pantry systems, and garage storage with adjustable shelving and drawers tailored to the space.

Cabinet Refinishing and Repainting

Strip, sand, and spray existing wood cabinetry in a new color or restored finish without replacing the doors or boxes.

Answers for Valley Homeowners

How much do custom cabinets cost per linear foot?
Fully custom cabinets typically run $500 to $1,200 per linear foot installed, while semi-custom lines start lower. Wood species, joinery, and finish drive the range. We give a firm written price after a free measure.
Should I reface, refinish, or fully replace my cabinets?
If the boxes are solid and the layout works, refacing or refinishing saves money. If you want a new layout or non-standard sizes, fully custom is the better spend. We look at your boxes during the measure and tell you straight.
What is the difference between framed and frameless cabinets?
Framed cabinets have a face frame across the front of the box, the traditional American style. Frameless, or European full-access, skips that frame for a bit more interior space and a flush modern look. We build both.
How long does it take to build and install custom cabinets?
Most custom kitchens take a few weeks from approved design to install, since each cabinet is built to order in the shop. The on-site install itself is usually finished in a day or two once the pieces are ready.
Are plywood boxes worth it over particleboard?
Plywood boxes hold screws and hardware better and shrug off the odd leak under a sink, which is why we build ours from cabinet-grade birch or maple plywood. It costs a little more up front and lasts far longer.
Do you serve my area?
We cover Yakima ZIP codes including 98901, 98902, and 98908, plus Selah, Union Gap, Moxee, Naches, Cowiche, and Tieton. Call (509) 440-9874 if your town is not listed and we will confirm.
Do you provide a free in-home measure and design?
Yes. We come to your home on Fair Avenue or anywhere in the valley, take field measurements, walk you through door styles and finishes, and hand you a written estimate at no charge.

The Yakima Valley Communities We Cover

We build and install custom cabinets throughout Yakima and the surrounding Yakima County towns, from the city neighborhoods to the farm communities up the valley.

  • Yakima, WA (98901, 98902, 98908)
  • Selah, WA
  • Union Gap, WA
  • Moxee, WA
  • Naches, WA
  • Cowiche, WA
  • Tieton, WA
  • Zillah, WA

Not sure we reach your street? Call (509) 440-9874 and we will tell you the same day.

Schedule an In-Home Visit

Ready to talk cabinets? We will measure your space, help you compare doors, wood, and finishes, and give you a clear written estimate with no pressure. Most Yakima installs move fast once your cabinets are built, and we handle everything from tearing out the old boxes to hanging the final door on Summitview Avenue or wherever you call home.

Call (509) 440-9874